Do you want your old T Model car to be speedy like a brand new car? But can’t do it due to a small budget? Do not worry, whether you’ve a late model engine, you may put it in your T model by following the procedures below.
 
Collect Necessary Equipment: First of everything you need some tools to install the latest model engine into your T model. Some basic tools are screw driver, wire cutter, jack and lever, lifter.
 
Hoist Your Car: For installing late model engine you should hoist your vehicle first because you’ll have to do some other personnel before changing engine.
 
Use jack and lever to hoist your vehicle. Drain lubricants and unplug wires: Then drain lubricants from your vehicle engine and remove electrical wires. Unplug the battery, but you can leave the sparking plugs. Remove Fan and air conditioning compressor: Remove the cooling fan from the engine and the intake air filter connection. Also cut off the connection of air conditioning compressor connection.
 
Take the engine out: First remove the connections of transmission line. Cut off the exhaust system connection from the engine. Pull out all connections that lead to the motor from the engine. After confirmed that all connections from the engine have been removed, uplift the engine from the T model car with the aid of a lifter and put it in a stable place.
 
Please make sure before lifting that you’ve tied the engine tightly, otherwise lifting it might fell down and get damaged. Install the late model engine: After removing the old engine from your favored T model car it is time to install the new one. At first tie up the engine correctly with strong wires and lift it up with the aid of a lifter. Place it inside the bonnet in the same place where the previous engine was. For this, you’ve to make sure before that your new engine is of same size as the previous one. Now screw the bolts and bits tightly to ensure safety.
 
Connect the cooling fan, exhaust system and intake air filter to the engine. Plug in the electrical connections again and connect the air conditioning compressor with the engine. Plug the ground connection to the battery. Connect the transmission line and check it. Check out all hydraulic connections. Start the vehicle! After making all connections correctly, remove the jack and lever, start the vehicle and go for a test drive with your favored customized T model car. Be Safe: Do not forget to check that you’ve screwed the bolt and bits tightly and while lifting the engine tie it up properly.
 
Need help? Give us a call.